- Shopping, made easy.
- /
- Get the app!
ESP32-S3 4.3inch Touch Screen Development Board Capacitive IPS Display 800x480, 32-Bit LX7 Dual-Core Processor Support 2.4GHz W-i-F-i and Blue-Tooth 5 (LE), Onboard CAN, RS485, I2C Interface,etc.
KWD 17
Official Pi PCIe to M.2 HAT for Raspberry Pi 5, HAT + Standard, Comes with RPi 5 Active Cooler, Supports NVMe Protocol M.2 Solid State Drive 2230/2242 High-Speed Reading/Writing
KWD 11
RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 12
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
KWD 13
-15%
Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
KWD 5.500
Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh
KWD 14.500
PICkit 5 in-Circuit Debugger/Programmer, Programmer-to-Go Support, Type-C Port, Supports MPLAB, Card Programmer
KWD 59
PCIe to M.2 Adapter Board for Raspberry Pi 5, Pi 5 NVMe HAT Compatible with 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SSD, 8Gbps Data Rate, High-Speed Reading/Writing
KWD 6
ESP32-S3 Development Board with 1.28inch Round Touch LCD 240×240 Pixel 65K RGB Color, 32-bit LX7 Dual-Core Processor with 6-axis Sensor, Support 2.4GHz W-i-F-i (802.11 b/g/n) and Blue-Tooth 5
KWD 11.500
Waveshare 2.13inch E-Ink Display HAT 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Black/White Two Display Colors, Support Partial Refresh
KWD 9.500
Waveshare Industrial Grade 2-Ch CAN to Ethernet Server, 2-Ch CAN + RS485 + Ethernet Port, Supports CAN to Ethernet and RS485, CAN Repeater, Dual Socket Aluminium Alloy Case, Wall-Mount Support
KWD 30
CM4 Adapter, Interface Protection Adapter Board for Raspberry Pi Compute Module 4 Lite/eMMC, Physical Protection for Frequent Plugging and Unplugging of CM4 Socket
KWD 5.500
ESP32-S3 Microcontroller Board with 1.85inch Round Touch LCD 360×360 Pixels, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor, with 8Ω 2W Speaker, Support W-F-i & B L E 5
KWD 17.500
3PCS ESP32-S3 Mini Development Board with Pre-Soldered Header, Based on ESP32-S3FH4R2 Processor, 240MHz Running Frequency, Support 2.4GHz Wi-Fi & Bluetooth 5, Onboard 4MB Flash Memory
KWD 11
Industrial 8-Ch Analog Output Module 12-bit DA Conversion DC 7~36V Wide Voltage Power Supply, Sending Modbus RTU Protocol Commands via RS485, 8-CH Voltage Output (0~10V)
KWD 12
-8%
Compatible with Raspberry Pi Pico 2 Microcontroller Board with Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core ARM Cortex-M33 and Dual-Core Hazard3 RISC-V Processor 4MB Flash, 3 Items
KWD 6
ESP32-S3 Ethernet Development Board, 10/100Mbps RJ45 Ethernet Port, 240MHz Dual Core Processor, Onboard Type-C Port & TF Card Slot, Support W-i-F-i & BLE & Ethernet Communication, with POE Module
KWD 12
ESP32-S3 Microcontroller Board with 1.47inch LCD Display 172×320 262K RGB Color, Dual-core Processor Up to 240MHz, Support W--iF-i & BLE, With Colorful RGB LED,Onboard multiple Peripheral Interfaces
KWD 8.500
Serial Bus Servo Driver Board for ST/SC Series Serial Bus Servos Up to 253, Integrate Servo Power Supply and Control Circuit, Support UART and USB Control for Raspberry Pi/Jetson Orin Nano/PC/ ESP32
KWD 4.500
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor
KWD 5
-25%
Microcontroller Board Rasp Pi Pico 2, Based on Official RP2350 Chip, Dual-Core ARM Cortex-M33 and Dual-Core Hazard3 RISC-V Processor 150 MHz, 520KB SRAM, 4MB Flash,Support C/C++, MicroPython
KWD 4.500
ESP32-S3 Development Board Onboard 8x8 RGB LED Matrix and QMI8658C Attitude Sensor,17 x Multi-Function GPIO Pins, Supports Wi-Fi and Bluetooth LE, 240 MHz Xtensa 32-bit LX7 Dual-core Processor
KWD 6.500
ESP32-H2 Microcontroller Development Board with Pre-Soldered Header Onboard ESP32-H2-MINI-1-N4 Module 96MHz Processor Built in 4MB Flash, Supports BLE/Zigbee/Thread Wireless Communication
KWD 5.500
RP2040 Microcontroller Development Board with 1.28inch Round Touch LCD 240×240 Pixel IPS Display 65K RGB Color with CNC Metal Case, Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 15
Waveshare PCIe to USB 3.2 Gen1 HAT for Raspberry Pi 5, PCIe to USB HUB, Extends The PCIe Interface to 4X High Speed USB 3.2 Gen1 Ports Driver-Free Plug and Play HAT + Standard
KWD 11
RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, Includes LoRa Board, Antenna 850~930 and IPEX to SMA Adapter Cable and USB Type-C Adapter Board and FPC Cable
KWD 9.500
2.15inch e-Paper HAT+ Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/RDKX3, Red/Black/White Three-Color 296x160 E-ink Display Screen SPI with Driver Board
KWD 9
7.3inch ACeP 7-Color E-Paper for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, E-Ink Display 800 x 480 Pixels SPI Interface 3.3V/5V
KWD 32.500
USB to RS485/RS232 Serial Converter Board, Onboard Original FT232RNL Chip Fast Stable Transmission,Multiple Devices Applicable, Compatible with Mac, Linux,Android, Windows 11/10/ 8.1/ 8/ 7, etc.
KWD 8
