12V or 24V 5V 3A 2USB: This DC to DC converter module has 2 USB charging port and integrated switch thin regulator module, can be enough to charge 2 devices at full speed at the same time, each port output 3A max, total current output is 6A
Parameter Introduction: Input voltage range: 12V or 24V; Output voltage: DC 5V, total output current: 3A max; USB cable length: 12.75 inches 32.5 cm, With stable performance and conversion rate up to 90%
Multiple Protection: Supports output short circuit protection, overcurrent protection, and overtemperature protection, IPX7 Waterproof protection; With input reverse connection, overvoltage and undervoltage protection, output overcurrent, overvoltage, undervoltage
Easy to Install: Pull of the boost key 90°MAX, insert the wire, press the boost key tightly. The converter has a red and black wire, the red is connected to the positive electrode, and the black is connected to the negative electrode
Widely Use: This power adapter can widely used in MP3, MP4, cell phones, LED display, speaker, golf cart, robot dog, monitoring equipment, industrial quipment, etc
Description
Specification Parameters:
Input range: 8V to 32V
Output voltage setting: 5V
Output current: 3A
Output power: 15W
Waterproof rating: IPX 7
Wiring instructions
Red: Enter the positive terminal
Black: Ordinary negative electrode
Protection Function
Short circuit protection Yes
Overtemperature protection Yes
Overcurrent protection Yes
Matters of Use
1. Can not reverse connection, the power supply has no reverse connection protection, reverse connection will damage the power supply
2. During use, the load can not be overloaded, leaving a margin for the power supply to ensure long term stable operation of the power supply
3. In the process of use, if the ambient temperature is too high, the power should be appropriately reduced, and low temperature work is the guarantee that the power supply can work reliably for a long time
4. Do not use near heat sources, such as fire or heater
5. Do not put the product in the fire or heat it
6. Do not use wires or other metal objects to short circuit the positive and negative poles of the product
7. Non professional personnel are prohibited from disassembling and repairing themselves
Note: This product is stored in a dry and cool place, avoid contact with corrosive substances, away from fire and heat sources