Package Contents: 1 x Magnetron Tube
OverView Size(without include Feet and tube):108x93x95 mm/4.2x3.7x3.7in(WxHxT)
Net Weight:1 Kg/2.2Lb
Install Holde Diameter(Middle):5.4mm/0.02in, Hole Central Horizontal Distance(Middle):94mm/3.7in
Install Hole Diameter(Side Big): 4.2mm/0.16in, Horizontal Distance: 94mm/3.7in, Vertical Distance: 35mm/1.4in
Install Hole Diameter(Side Small):3.2mm/0.13in, Horizontal Distance:100mm/4in, Vertical Distance:24mm/0.94in
Kindly Remind:
1.Please shut down power supply and use electrical meter to conform high voltage has been released before you replace it. Safe is first.
2.Not include install screws and thermostat, so remove your old magnetron and keep remain your original screws and thermostat, reused for new magnetron.
3.Microwave first produce at north America, then switch to Korea and Janpa,Finally switch to China and South-East Asia. So normally parts are from China and South-East Asia.
4.GE microwave's magnetron is hardly made by itself, most of them made by other brands, but require strict quality.
5.Please check whether there are high voltage provide for microwave magnetron first,because it will not heat food like magnetron fail(same phenomenon) such as high voltage capacitor is broken.
6.Microwave magnetron's SN explain as following, 2M214-39F, 2M214 is Module Series,main parameter,39F is produce batch. Same module series is compatible.
Ohmmonburged is the original and quality strict control seller for this brand