Search

Search

2pcs USB Type C Pluggable Development Board for ATtiny85 ATtiny Series Programming Editor Connector Replacement for Digispark Arduino Module

KWD 4
Size2 pcs
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • USB Type: for USB Type C Female Socket
  • This is a pluggable programming board, before that, you need to insert the bootloader chip into the IC socket.
  • With 9 pins design, working voltage is 5V.
  • Suitable for Attiny85 / Attiny13A / Attiny25 / Attiny45 Programming Editor.
  • It can be a replacement for digispark Arduino module.
  • Noted: The package did not contain the developed chip, you need to prepare the Attiny Chip and insert it into the IC socket on the board.

Description

Package Content: 2pcs x for USB Type C Pluggable Development Board.... Attiny85 Kernel Program: github.com/ArminJo/micronucleus-firmware You need to install this kernel for the ATTINY85 chip before you can use the USB downloader. It is recommended to download using ARDUINOISP...... Installation Tips: 1. Kernel bootloader must be installed for blank ATTiny85 chips. 2. Then it must be inserted on the blue board, please pay attention to the direction of the chip. 3. To plug in the correct USB cable for the blue board, a new device must be found on the computer, but it will disappear automatically.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}