Search

Search

Current to Voltage Module Current 0-20mA Converted to Voltage 0-5V(Current-to-Voltage)

KWD 3
Brand
KNACRO
Weight
11 g
SizeCurrent-To-Voltage
– 1 +

Special Features

  • Voltage-to-PWM module able to convert an analog signal 0-5V / 0-10V signal into the digital PWM
  • PLC can be used for industrial control panel or other signal interface switching, by adjusting the voltage to regulate the PWM duty cycle.
  • Under the module size, easy to use in different places.
  • Embedded microcontroller technology. Easy to operate, you can fine-tune the potentiometer.
  • Take the PWM signal input level range by short-circuiting.

Description

Module Working voltage: DC5V - 12V; (Power Requirements: greater than 100mA). PWM signal receiving frequency range: 1KHz ~ 3KHz.
4.5V to 10V peak to peak level, jumper inserted at 5V. Class level signal mainly for general industrial control card (such as MACH3 board), 5V CPU interface;
Conversion range: 0-5V / 0-10V voltage converted to 0% ~ 100% PWM .
Tolerance: 5%.
Size：33*33*16mm(L*W*H).
Weight:11g.
Interface Description:
VCC: Power supply 5V - 12V.
GND: Power supply ground.
PWM: PWM output signal positive.
GND: the outputsignal negative terminal.
VIN: iutput voltage 0-5v/0-10V.
GND: iutput voltage ground.
Instructions:
When the frequency is changed, the corresponding relationship may be offset needs to be recalibrated.
By adjusting the iutput voltage to regulate the duty cycle.
Accuracy can be controlled by adjusting potentiometer.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}