Verification of environmental conditions.
A. Unless otherwise specified, the tests in this specification shall be conducted under the standard atmospheric conditions tested
B. temperature: 15℃~35℃.
C. Relative humidity: 45%~75%.
D. The instrument accuracy of the measured voltage shall not be less than 0.5 levels and the internal resistance shall not be less than 10 KΩ/V.
E. The instrument accuracy of measured current shall not be less than 0.5 level.
F. The accuracy of the instrument used for temperature measurement shall not be less than ± 1℃.
Product parameters.
Input range: 30-90V
Rated input voltage: 36V/48V/60V/72V/84V
transfer efficiency: 95%
input line: 15-16CM (R+ B-)
output voltage: 24V
Output: 20A MAX
Maximum output: 480W MAX
No-load adjustment rate: 2%
load regulation: 3%
idle dissipation: ≤15MA
ripple wave: 200mVP-P
SAFETY TESTING.
Do not use the device near a heat source (such as a fire or heater).
Do not connect the input line to 220V electricity.
Do not put the product in fire or heat it.
Do not short the positive and negative poles of the product with wires or other metal objects.
It is forbidden for non-professional personnel to disassemble and repair the product by themselves.
Translated with DeepL.com (free version)