PCIe to M.2 Adapter Board for Raspberry Pi 5, Pi 5 NVMe HAT Compatible with 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SSD, 8Gbps Data Rate, High-Speed Reading/Writing
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
PCIe To M.2 Adapter Board for Raspberry Pi 5: This PCIe TO M.2 M key board is for Raspberry Pi 5, compatible with 2230/2242/2260/2280 size M.2 solid state drive, supports Gen2 and Gen3 modes, supports booting PI5 from solid state drive (SSD)
Connecting to PI5 via 16PIN Cable: Based on 16PIN PCIe Interface of Raspberry Pi 5. This Kit comes with 16Pin Cable
NVMe Solid State Drives Support: Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Improves Reading/Writing Speed of Raspberry Pi, up to 8Gbps: Faster reading/writing speed compared to the TF card slot of Raspberry Pi , greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive. NVWe: The Theoretical transmisstion speed of the Gens mode is up to 8Gbps. The Measureed Reading/Wring speed is Approx. 800mb/s
Two Power Supply Methods: Supports Power Supply Via PCIe Cable Or 3PIN Cable. Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power
Onboard Dual LED Indicators: Easy to monitor the Working Status. ACT Status Indicator: Keeeps blinking while ready/writing. PWR: Lights up when power-on
Provide Online Development Resources /User Manual: bit.ly/3WqwZBa
ESP32-S3 4.3inch Touch Screen Development Board Capacitive IPS Display 800x480, 32-Bit LX7 Dual-Core Processor Support 2.4GHz W-i-F-i and Blue-Tooth 5 (LE), Onboard CAN, RS485, I2C Interface,etc.
KWD 17
RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector
KWD 12
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
KWD 13
-8%
Compatible with Raspberry Pi Pico 2 Microcontroller Board, with Yellow Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash, 3 Items
KWD 6
