AIDITIYMI ERF3A90 Replaced Voice Search Command Remote Control fits for Hisense Android Smart TV

Install 2 new AAA alkaline batteries, pair this remote with your TV before use, then it will work.
This is a replacement Voice remote controller.

Works for Hisense TV Models:

55U8G 65U7G 75U7G 65U88G 55U78G 55U7G 55U88G 65U78G 65U8G 75U78G 75U9DG 43A53FUA 55U7H 55U8H 65U7H 65U8H 75U7H 75U8H 85U7H U88G U8H U8 U7H QLED Series

50A53FUA 50A66FUA 55A53FUA 55A66FUA 65A53FUA 65A66FUA 75A53FUA 75A66FUA HU70A6109FUWA 55U6H 65U6H 75U6H 43A6H 55A6H 65A6H ‎50A6H 75A6H 70A6H 55U6K 75U6K 65U6K 55A76K 75A76K

Package Content: 1 x Voice Remote Control (Batteries and User Manual are NOT Included) Pairing the Remote Control:
Pair the remote to the TV after you power it on. Keep the remote control within 10 feet from the TV. Press and hold the [三] button at least 3 seconds to start pairing.
If the remote paired successfully then a confirmation will display on the screen. If it did not pair successfully then an "unsuccessful" message will display. Repeat step 1.

NOTE:
If an unknown error occurred with the remote then it could've been caused by interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries and press any key for 1~2 seconds, then the remote control can work normally.
The remote cannot be paired to the TV while the TV is in standby mode.

Microphone and voice control:
Hold down the voice (Google assistant) button and a voice assistant appears on the screen.
You can enter voice commands and perform corresponding voice control functions.Lift your hand and close the mic to end your voice input