All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
【Camera Module Kit】This is a Fisheye ( Wide Angle )175 degrees IR Camera for Raspberry pi 2, for Raspberry pi 3B and 3B+.You can use it to take a wide angle picture or video by this camera .This Night Vision Camera Module Board kit includes RPi Camera,15cm 15 pin FFC adapter; Night Vision CAMERA: This Camera supports Night Vision. Supports all revisions of the Pi 5 megapixel .OV5647 sensor in a fixed spot module.
【High Performance】This Night Vision Camera Module Board Supports connecting infrared LED and/or fill flash LED.Viewing Angle: 175°wide angle; Sensor Highest resolution: 25921944.
【Compatibility】This camera designed for Raspberry Pi 3B/3B+ and Pi 2B B+, the preferred operating system for Raspberry Pi .
【Adapter Cables】The length of these 15pin FFC adapters are 15cm .15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector. You can change the length and extension them convenienctly and timely.
【IR-CUT Camera】The camera is equipped with photosensitive resistance,built in IR-CUT, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. The advantage is that during the day, the photographs taken will not be reddish, which also eliminates the need for manual switching.
Note:
When using this camera, please note: Normal problems:
1.The computer doesn't recognize the camera; The LED lights doesn't work (including one on and one off); The camera doesn't work after a period of use. Solution: Tighten the bolts of the LED and camera, then restart it.
2.The LED lights always turn on no matter if the camera is turned on or not. Solution: Connect the power supply to GPIO, then the LED light will be on only when the camera is turned on.
One Single Board Computer 1GB DDR3 AllWinner H3 Quad Core Run Android Ubuntu Debian (One(1GB))
KWD 14.500
waveshare 13.3inch Capacitive Touch Screen LCD V1, with Case and Toughened Glass Cover, 1920×1080, HDMI, IPS,
KWD 62
Freenove Robot Arm Kit for Raspberry Pi 4 B 3 B+ B A+, Stepper Motor, Metal Structure, Clamping Mode, Drawing Mode, Record and Replay (Raspberry Pi NOT Included)
KWD 59.500
MMDVM Duplex Hotspot Module Dual Hat V1.5.2 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for Raspberry pi with USB Port (with OLED)
KWD 22
