Overview
ESP32-S3 Development Board is with onboard 1.28inch Capacitive Round Touch LCD, Li--ion batt-ery re-charge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.
The SoC features hardware encryption accelerators, RNG, HMAC, and digital signature modules, meeting the security requirements of the Internet of Things (IoT). Its various low-power operating modes are suitable for power requirements in IoT, mobile devices, wearable electronics, smart home applications, and other scenarios.

Features
1. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency 2. Supports 2.4GHz W-i-F-i (802.11 b/g/n) and Blue-too-th 5 (LE), with onboard an tenna 3. Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory 4. Type-C connector, keeps it up to date, easier to use 5. Adapting 6 × GPIO pins via SH1.0 connector. Comes with SH1.0 12PIN cable 6. Onboard 1.28inch Capacitive Touch Round LCD, 240×240 resolution, 65K color 7. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture 8. Onboard 3.7V MX1.25 li-th-ium batt-ery rechar-ge/dischar-ge header 9. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios 10. Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
Provide Online Development Resources /User Manual: bit.ly/3FFaDT3

LCD Parameters
Touch Chip: CST816S
Display Chip: GC9A01A
Touch Interface: I2C
Display Panel: IPS
Display Interface: SPI
Resolution: 240(H)RGB x 240(V)
Display Size: Φ32.4mm
Pixel Size: 0.135(H) x 0.135 (V)mm

Package Content
ESP32-S3-Touch-LCD-1.28 x1
SH1.0 12PIN cable x1