Related Items

---

• Relay Board Adapter for Raspberry Pi, Modem FM Repeater Controller for use with Development Boards, Need Based on ARM Cortex M3, M4, or M7 KWD 19
• Xicoolee 1.54 Inch E-Ink Display Module for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+ Zero W 2W Epaper Screen for Arduino/Jetson Nano KWD 7.500
• Motor and Servo Driver HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Adopting Dual Chips PCA9685+TB6612, Drive Two DC Motors KWD 8
• Dual GPIO Expander for Raspberry Pi Pico, Two Sets of External Expansion 2x20PIN,Four HY-2.0-4P Headers,Full-color RGB, Onboard Micro SD Card Slot, for Connecting More Expansion Modules KWD 7
• RGB Matrix Adapter Board Converter for Raspberry Pi Motherboards and for Raspberry Pi Pico 1 HUB75 Interface 2 Power Input Connectors TYPE-C 5V/4A and DC-044 5V/8A KWD 9.500
• 5PCS 4Pin Dupont Line HY2.0mm Pitch, Grove - Universal 4 Pin Buckled 25cm Cable (5 PCs Pack) KWD 3.500
• MCP23017 IO Expansion Board Module I2C Interface Expands 16 I/O Pins Supports for Raspberry Pi for Arduino STM32 Onboard 3-Digit DIP Switch I2C Interface Compatible with 3.3V/5V Level KWD 5
• Pico Expansion Plus GPIO Expander for Raspberry Pi Pico, Two Sets of External Expansion Pins 2x20PIN, Pico Dual Expander KWD 5
• RGB Full-Color LED Matrix Panel for Raspberry Pi/Arduino/ESP32 3mm Pitch 64×64 4096 Individual RGB LEDs Brightness Adjustable with Adapter for Directly Plug KWD 22
• 2 Channel Relay Module Relay Expansion Board for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B STM32 Ardui.,Optocoupler Isolation 3.3V&5V KWD 4.500
• Dual-CH,Can Bus Expansion HAT for Raspberry Pi, with 2-Channel CAN Interface Communication, Dual Chips MCP2515 and ATA6561 KWD 9.500
• 4-CH Relay for Raspberry Pi Zero Zero W Zero WH 2B 3B 3B+ 4B Power Relay Expansion Board Module Four Channel KWD 8
• for Jetson Nano Camera IMX219 8MP with IMX219 Sensor 8 Megapixels Fixed-Focus 120 Degree FOV 3296 * 2512 Resolution 15P-1.0 MIPI Interface 30 fps KWD 11.500
• MCP23017 IO Expansion Board Module 16 I/O Pins for Raspberry Pi for Arduino STM32 Onboard 3-Digit DIP Switch I2C Interface 3.3V/5V Level KWD 5
• 4 Inch Touch LCD Shield for Arduino TFT Resistive Touch Screen ST7796S LCD Control 480×320 Capable of Folding at Any Angle up to 180° KWD 13.500
• VL53l0X Laser Ranging Sensor Distance Module for Raspberry Pi Adui STM32 ToF Time Flight Distance Measurement Detector Module I2C Interface Accurate Ranging Up to 2m Distance Measurement KWD 6
• 1.44inch LCD Display Module for Raspberry Pi Pico, 128×128 Resolution Screen TFT Display Module, 65K RGB, Embedded ST7735S Driver SPI Interface, Compatible with Raspberry Pi Pico Header KWD 6
• Serial Expansion Module I2C Interface, Adopt SC16IS752 UART Expansion Chip, 8-bit I/O Expansion, 2-Channel UART 8 GPIOs Expansion,Suitable for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B KWD 7
• OV5640 5MP USB Camera Module Autofocus 100° HD, Adopts USB2.0 Interface,Built-in Flash and Microphone,Support Win XP / Win7 / Win8 / Win10 / MAC OS/Linux/Android Operating System KWD 13.500
• 7.3 Inch 7 Color e-Paper Display for Raspberry Pi/Arduino/STM32 Advanced Color ePaper 800x480 Pixels with Driver Board E-Ink Screen KWD 32.500
• POE HAT for Raspberry Pi 5 Power Over Ethernet Adapter with Onboard Cooling Fan and OLED Display Supports 802.3af/at Network Standard Comes with Metal Heatsink Fits Raspberry Pi 5 Case Original KWD 12
• 7.5inch E-Ink Display HAT for Raspberry Pi/Jetson Nano Also Fits Arduino/Nucleo 800x480 Pixel Black/White Two-Color SPI Interface E-Paper Screen Panel KWD 26
• New for Raspberry Pi Pico 2 – High-Performance RP2350 Microcontroller with Dual-Core Arm Cortex-M33 & RISC-V, 2MB Flash, 2MB SRAM, Secure Boot Comes with Pico Expansion Board KWD 13.500
• 2.42inch OLED Display Module - 128x64 Resolution, SPI/I2C Communication, Compatible with Raspberry Pi, Arduino, SSD1309 Driver Chip with Metal Case (Blue) KWD 8.500
• 2.13inch E-Paper Display Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, 122 x 250 Pixels Two-Colour, Supports Partial 560ms and Full 950ms Refresh SPI Interface KWD 8.500
• Universal E-Ink Display Driver HAT Board, Fits Raspberry Pi, Compatible with Arduino, STM32, ESP32 – SPI Interface with Open-Source Code for E-Paper Projects KWD 7
• 2 Inch LCD Display Module for Raspbrry Pi/Arduino Onboard ST7789V Controller 2 Inch IPS LCD Screen 240x320 Resolution SPI Communication RGB, 262K Color KWD 6
• -50% for Jetson Nano Camera IMX219 8MP with IMX219 Sensor 8 Megapixels Fixed-Focus 77 Degree FOV 3296 * 2512 Resolution 15P-1.0 MIPI Interface 30 fps KWD 5 KWD 10
• BME688 Environmental Sensor, AI-Enhanced, Monitors Temperature, Humidity, Pressure & Gas, I2C/SPI, 3.3V/5V Compatible for Raspberry Pi, Arduino, ESP32 with AI Function KWD 11
• 2.7inch E-Ink Display HAT for Raspberry Pi/Raspberry Pi Pico/Jetson Nano/Arduino/STM32 264X176 2.7-Inch E-Paper HAT Two Color Black White SPI Interface KWD 9.500
• 2.13 Inch E-Ink Display HAT for Raspberry Pi/Jetson Nano/Arduino/STM32 Three Color Red White Black E-Paper Screen SPI Interface 250x122 Resolution KWD 9
• Isolated RS485 CAN HAT for Raspberry Pi Ardui STM32 2-Ch CAN Bus+1-Ch RS485 Adopts MCP2515 + SN65HVD230 Dual Chips Slide Switch 3.3V 5V Level Multiple Protection Circuits KWD 13.500