Specifications:
Angle of View: 54 x 41 degrees
Field of View: 2.0 x 1.33 m at 2 m
Full-frame SLR lens equivalent: 35 mm
Fixed Focus: 1 m to infinity
Max frame rate: 30fps
Sensor: 5 Megapixels Omnivision OV5647
Interface: CSI
Still picture resolution: 2592 x 144
Video Resolution: 1080p@30fps, 720p@60fps, 480p@90fps
Focus Mode: fixed-focus
Output Pins: 15Pin
Output Signal: YCBCR4:2:2,RGB565,RAWRGB
Optical Configuation: 4G+IR650
Module Size: 25*24*9mm
Ribbon Length: 6 inch
Hardware connection:
1. Flexible flat cable, 90 degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface.
2. Tear off the protective film on the lens before use
3. Bare board, pay attention to ESD damage, beware of static electricity!
Software use:
1. RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
2. Select camera in raspi-config, start the camera driver in RPi firmware, and restart
3. Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
4. The captured video clip needs to be played by mplayer
How to broadcast the camera data through live webcast:
Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for output.