Flipper Zero external FLASHLIGHT module.A fully assembled FLASHLIGHT module board for the Flipper Zero device. The external flashlight has 16 powerful LEDs. Luminous flux power is 2.2 watts. The board can be used with any recent version of Unleashed, Roguemaster, or Xtreme firmware for the Flipper Zero. To enable the use of the external flashlight module go to the GPIO menu and select 5V on GPIO, than toggle the setting from 'OFF' to 'ON'. Then use FLASHLIGHT application. Pin 7/GPIO PC3 is used for control flashlight. The module heats up during operation. Don't worry, this is completely normal and the increased temperature is completely safe for the module