Replace Part Number: 14-1130,140-1130,246063,135696.
NOTE: If you have the older Power Gear 14-1098 circuit board on your RV, you will need to have new holes and make some changes to the stock wiring.
Easy to install: Installation instructions included, disconnect power, remove circuit breaker and glass fuse, install new circuit board, connect 6-pin relay.
Package Includes:1 x Slide out relay circuit board,1 x Wire Harness Connector,2 x Slow blow fuse,4 x Spacers for the bottom of board.
Description
The same fuse and breaker that is on the old board may be used on the new 140-1130. The 140-1130 controller will need the center wire on the wall switch to be a 12VDC (positive trigger) which on some models of controllers such as the 14-1098 are ground trigger.