Aqua-Buff 1000-F Fast-Cut Compound Aqua-Buff 2000 Compound and Polish *Make sure you select the right product for your project. For projects using Aqua-Buff 1000F apply as follows: Spread Aqua-Buff 1000-F Fast Cut Compound on the surface to be compounded with a brush or cloth, several square feet at a time using one-half the normal amount and mist the surface with water. Immediately machine buff with a clean, damp compounding pad. Repeat the process to eliminate scratches from exceptionally hard surfaces. Should the compound become dry while being buffed, re-wet again by misting the surface with water. Follow with Aqua-Buff 2000 For projects using Aqua-Buff 2000 apply as follows: Spread Aqua-Buff 2000 Compound and Polish on the surface to be compounded with a brush or cloth, several square feet at a time using one-half the normal amount and mist the surface with water. Immediately machine buff with a clean, damp lamb's wool-type pad. Repeat the process to eliminate scratches from exceptionally hard surfaces. (Or if you haven't done so, first use Aqua-Buff 1000-F or 1000-W Fast-Cut Compound). Should the compound become dry while being buffed, re-wet again by misting the surface with water. Note: For best results, use machine buffers that generate at least 2500 rpm for Aqua-Buff products.