Dual Electric Fan Relay Kit with Thermostatic Sensor Switch 185 on 175 Off 40A Radiator Electric Cooling Fan Wiring Kit Automotive Fan Wiring Kit

Fitment:

Fit most Rods and Classics Engines including GM (CHEVY, GMC, OLDS, CADILLAC, PONTIAC, BUICK, FORD, & MOPAR (CHRYSLER, DODGE, PLYMOUTH) , Please measure to make sure this is the right

Work for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES.

Include:

1x Wiring diagram
2x 40A relay with wiring harness
1x 185'F on-175'F off temperature switch
1x 3/8" Thread-In Probe
1x 3/8" to 1/2" adapter
2x Inline fuse holder
2x 20 amp fuse
8x Ring terminals
4x Fan pigtail connectors

How to Connect Cable
Red-to +12VDC
Coffe-to Fan Positive
Black-to Ignition
Grey-to Sending Unit
Specifation:
Condition: New
Length of wire: 50cm/ 19.68in
Material: Metal and Plastic
Please allow a measurement error of about 2-3cm
This is a non-oem products, accessory only!

Want to install a/c to your hot rod or operate thermostatic switch when a/c ON?

It shall turn cooling fans on when engine reaches preset temperature of thermostatic switch mounted in the engine head or when A/C is turned on.

Will this cable longer enough to install?

The length of cable is about 50cm, it will suitable for you to install it near or far from engine.

Notice

1. For 10", 12", 14" and 16" fans including dual fans. We suggest using one separate relay wiring kit for each fan.

2. The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket. Do not use tape on the sensor for may cause poor electrical contact or incorrect temperature readings.

3. You can crimp bigger wires to it If you intend to mount high-profile cooling fans. The 14AWG wires (15 amps) are not bigger enough for high amps draw. ( 12 Gauge - 20 Amps, 10 Gauge - 30 Amps, 8 Gauge - 40 Amps )

20 Amp Fuse w/ Holder
Ensure the inlet voltage is under or equal 12V, avoid excessive voltage to blow the fuse or cables.

Precise Marking
Ensure convenient and accurate installation

Strictly Check to Each Point
Please crimp bigger wires to it If you intend to mount high-profile fans.

Quantity 2 Pcs