Part Type: Hub Bearing Retaining Nut Socket

Material: Hardened Metal

Surface Finished: Black Oxide

Manufacturer Warranty: 1 Year

Part Number: Replace 2066600030

Description:

· 12 pin axle spindle hub bearing retaining nut socket

· Assist in servicing remove and install the hub bearing retaining nut

· With 1/2″ drive, can be used with ratchets, breaker bars and torque wrenches

· Hardened material, durability with black oxide surface finished

· Fits rear hubs for Dodge Ram 2019 and up 3500 dual rear wheel trucks, 4500, 5500 (D2, DD, DP) chassis cab trucks with 12" axles

Instructions:

1. Chock front wheels and jack up rear of truck safely using manufacturer jacking points.

2. Remove rear wheels to access hub nut.

3. Clean any debris from hub nut and surrounding area.

4. Fit socket fully over the 12-point hub nut.

5. Attach 1/2" drive torque wrench to socket.

6. Loosen hub nut, but do not fully remove.

7. Switch to breaker bar for increased leverage once nut is loose, finish removing nut.

8. Inspect nut threads and hub bearing for damage. Replace as needed.

9. Install new or cleaned hub nut. Tighten with torque wrench to manufacturer spec(500 ft-lbs).

10. Install rear wheels and lower truck. Torque lugs to spec.

11. Remove chocks and test brake operation before driving.

Fitment:

For Dodge Ram trucks 2019 and newer 3500, 4500, 5500(D2, DD, DP)