OE Number
CJ5Z9U465A
1801870
CJ5G9U465BA
31370551

Will fit Following Models
Compatible with 2015-19 Fo-rd Ed-ge 2.0L L4 - Gas, 2.7L V6 - Gas
Compatible with 2017-19 Fo-rd Es-cape 2.0L L4 - Gas
Compatible with 2016-19 Fo-rd Ex-plorer 2.3L L4 - Gas
Compatible with 2014-19 Fo-rd Fu-sion 1.5L L4 - Gas
Compatible with 2015-19 Fo-rd Mu-stang 2.3L L4 - Gas
Compatible with 2017-18 Li-ncoln Con-tinental 2.7L V6 - Gas, 3.0L V6 - Gas
Compatible with 2017-19 Li-ncoln M-KC 2.0L L4 - Gas
Compatible with 2016-18 Li-ncoln M-KX 2.7L V6 - Gas
Compatible with 2017-18 Li-ncoln M-KZ 2.0L L4 - Gas, 3.0L V6 - Gas

How to install a diverter valve?
It is very easy to install a diverter valve if you follow the steps that listed below.
Step 1: Place the front of your car on a jackstand and remove the undercover under the engine. You will see the diverter valve on the passenger side – in the section between the lower spoiler and the passenger front tire, near the passenger side of the Air Conditioner (AC) compressor.
Step 2: Cut the single use crimp clamp with container snip.
Step 3: Unscrew the clamp with a screwdriver, mostly flat head.
Step 4: Remove the vacuum line from the upper part of the valve and then remove the diverter valve from your car.
Step 5: Installing a new diverter valve is basically the reverse of the removal process.
Also, use the enclose clamps to fix vacuum and hoses line and the enclosed ziptie to fasten vacuum hose to the boost hose in order to keep it away from moving parts.