Jumper Cable Clamps for Milwaukee M18 18V Battery Jumper Starter Automotive Booster Cables Fit for Mid-Size Cars Light Trucks Car to Jump Start a Car Using Tool Battery 8AWG 5.9FT power Cord
【Specifications】Power cord length: 1.8M/5.92Feet, 8 gauge US standard plug, The red clip connects to the positive terminal ”+”of the car, The black clip connects to the negative terminal ”-”of the car. The outer layer is silicone rubber sheath. The applicable voltage range is 12-24V. Comes with storage bag + work gloves + Cable ties
【PREMIUM MATERIAL】The car battery adapter is made of solid ABS plastic, which features stability and heat resistance. Built-in thick copper wire with excellent electrical conductivity. The outer layer is wrapped with PVC material, which is fireproof, wear-resistant and durable. When bending, the clip is made of fully insulating material to prevent sparks, pr oviding reliable performance and durability
【Wide Application】This power cord is specially designed for jump starting Milwaukee M18 18V batteries, with a voltage range of 12-24 V, widely used in medium-sized cars, light trucks and sedans. Jumper cables provide you with a new solution to a dead car battery, allowing you to conveniently use the power of an available cordless tool battery to start your car without having to start it from another vehicle
【Installation Instructions】The car battery adapter is easy to install and adjust, 1. Connect the red battery clip of the jumper cable to the vehicle's positive terminal (+) and the black clip to the negative terminal (-). 2. Plug the battery into the adapter and make sure it is securely locked 3. Start the vehicle 4. After successfully starting the vehicle, within 28 seconds remove the jumper cables and disconnect the vehicle battery from the tool battery
【Portability】The upgraded Milwaukee M18 battery jump starter is lightweight and easy to store in the car, ready for use at any time. No need to rely on another vehicle for power, which simplifies the jump starting process. Note: This product does not include the Milwaukee M18 battery
【Important Tips】 1. When connecting, please place the battery in a safe area on the ground, and the battery power must be kept above 50%. 2. If the first ignition fails, wait a few minutes before trying to ignite again. 3. If ignition is successful, unplug the cable within 30 seconds. 4. This jumper cable does not convert or reduce voltage. It simply provides an additional option to start the car in an emergency
-8%
ARP 3502802 Pro Series Flywheel Bolt Kit
KWD 11
KEYOOG EGV544 EGR Valve w/Gasket Fit For 1995 96 97 98 99 00 01 2002 S-aturn SC1,SC2,SL,SL1,SL2,SW1,SW2 (Replaces Exhaust Gas Recirculation OE# 21009422 21015284)
KWD 14
-18%
15-75221 1575221 15 75221 GM Equipment Blower Motor Wiring Harness, 15887352 Silverado Fan GM AC Harness Blower Motor Connector Compatible with GMC Sierra Yukon Xl Chevy Tahoe Suburban Hummer H2
KWD 7
SKF Drive Shaft Center Support Bearing compatible with Dodge Ram 3500 2006-2010
KWD 56
