Rust Converter
Rust converter for metal provides a simple method for rust removal. Simply apply rust remover on the rusted surface of the metal to convert the rust into a black protective film, preventing further rust and corrosion and extending the service life of the metal. It also saves time and energy for rust removal.

How To Use
1. Remove impurities and oil stains on the surface of rust. Using sandpaper will achieve better results.
2. After stirring the rust converter evenly, apply it evenly with a brush. A thick coating will have better results.
3. Wait for the conversion to take place for 1 hour, and the surface rust can be completely converted into a black coating.

You Will Receive
1 x Rust Converter 500g
1 x 240 grit sandpaper
1 x 120 grit sandpaper
1 x Brush
2 x Gloves

Note
1. Store the product in a cool and dry place above 0℃. Once frozen, it will lose its properties and should not be used.
2. Do not touch or move it before it is completely dry.
3. When using, it needs to be applied thickly. When there is wind in the environment, the thickly applied liquid may be blown away by the wind, affecting the use effect.
4. When used on the facade, it needs to be repeatedly applied up and down more than 3 times. If necessary, it needs to be applied again and wait for drying.
5. 500g of product can be used for 5-6 square meters.
6. Avoid contact of the applied surface with moisture for at least 24 hours after application.
7. Before using it on a large area, it is recommended to conduct a small-scale test first.