PRECAUTIONS AND WARNINGS
◆Avoid operating temperatures exceeding 65C(150°F
◆Never touch the motor after use as it may be EXTREMELY hot ◆Allow the motor to cool completely between uses.
◆Be sure to use the proper size motor mounting screws.
◆Do not over-tighten the motor mounting screws.
Exterior Dimensions:
Shaft diameter: 3.175mm
Output shaft :D shaft
Output shaft :11mm
Outside diameter : 36mm
Body length :57mm
Mounting holes: 25mm from each other, M3 screw holes
INSTALLATION AND MAINTENANCE
◆lfreplacing the motor mounting screws,use the same type and size that your vehicle was equipped with
originally
◆Do not over-tighten the motor mounting screws.Doing so may strip the mounting hole threads
◆Connectthe+and-motor leads to the corresponding leads on your Electronic Speed Control(ESC)
To clean your motor,lightly brush dirt away on a regular basis paying particularly close attention to the areas
around the ball bearings.DO NOT spray cleaners or solvents into the motor
◆0n a regular basis,inspect the brushes to be sure they move freely within their hoods
◆When the brushes become worn,or ifthey display signs of color change,replace them