This kit contains two brackets which will repair two windows.

Did one of the front windows in your Cherokee make a snapping or grinding noise, the window no longer works, the glass wants to fall down into the door and you can move it up and down by hand?

The power windows in the Cherokee are notorious for breaking in this manner. The problem is the design of the mechanism used to move the window- a plastic bracket rides inside of a metal track in the door. As you use the window, part of the plastic bracket wears away until it becomes too thin to support the weight of the window, at which point it snaps and down comes the glass! Wear isn't the only reason for the failure of this part however - it is simply too weak. People have had brand new window regulators installed and despite never using the window, the regulator broke anyway.

We have created a permanent solution to this problem. The main component of the kit is a window powdercoated steel bracket that replaces the broken plastic part. The stock spiral cable inside the regulator attaches to this bracket in exactly the same manner as the stock bracket. In order to install it, the regulator assembly is removed from the vehicle and disassembled. The broken plastic portion of the stock lift plate is cut off and the repair bracket is bolted in its place.

All of the hardware that you will need is included, along with a Torx tool. Also included is a four page, step-by-step installation guide with full color photos. You are also able to e-mail us for personalized, professional technical support should you have any questions or run into problems during the install. This kit can be installed using common hand tools for a simple DIY repair..

If you have any questions regarding fitment (or anything else for that matter), please don't hesitate to contact us. Simply click on our seller name above (Steiger Industries), and then click the yellow "Ask a question" button.