Adapted to Radiolink AT9SPro/AT10II/T8FB, Radiolink's unique DSSS&FHSS hybrid dual spread spectrum
technology and T8FB's FHSS spread spectrum technology
enable wireless transmitter trainer lines to perform better signal transmission.
Compatible Receivers
Supports all receivers that can output PPM signals,
including Radiolink R6DS/R6DSM/R12DSM/R8EF/R8FM.
Specifications:
Length:12.7cm
Weight: 9g
Support signal: PPM signal
Compatible receiver: Radiolink R6DS/R6DSM/R12DSM/R8EF/R8FM/R8F/R7FG
Input voltage:5-15V, (supports 8 1.2V dry batteries or 2S-3S lithium battery)
Output voltage: 5V
Current:200mA
Radiolink R12DSM 2.4G 12 Channels Mini RC Receiver
SBUS/PPM Long Range Control RX for FPV Racing Drone Quad Airplane Helicopeter for Radiolink
AT9 AT9S AT9S Pro AT10II AT10 12CH Receiver R12DSM Overview
How to Match Code with Transmitter:
① Put the transmitter and the receiver close to each other about of 50 cm.
② Turn on the transmitter, then power on the R12DSM.
③There is a black button on the R12DSM,press the binding button
in one second until the receiver light starts blinking and release,
after about 8 times blinking, match code success when receiver signal LED always on.

SBUS/PPM and PWM signal change
Short press the ID SET switch two times within 1 second,
the signal is changed from SBUS to PPM.
The red LED indicatesPPM signal.
The blue/purple indicates SBUSignal.
R12DSM ReceiverSpecifications:
Channel:12ch
SignalOutput:SBUS/PPM
Work Current: 40-180mA(5V)
Power Supply: 4.8~6V
RF Power: Precision:4096
Size:1.18*0.59*0.04in
Weight: 2g