This very unique 3D melting clock silicone mold is a huge 41cm (16") long, 24cm (9.5") wide and 10mm (0.4") deep, at the deepest point. The mold is beautifully detailed with two layers 'melting blobs' one at the top and another along the botton of the clock's frame. The clock's face is slightly raised, enabling you to do a layered resin effect. The nib for the clock mechanism is 9mm wide and 6mm high. The clock number range in size and become larger as they 'melt' to the bottom. This mold holds about 330g (11oz) of resin. NOTE: My silicone is heat resistant up to 120 degrees celscius (248 degrees fahrenheight). If you overheat the mold using your torch, you WILL melt the silicone and it will stick to the resin. This is not a fault with my mold, it is user error so please be careful using your heat gun or torch.