Search

Search

Oil Supply Rail End Plugs & Gasket/O-Rings 4C3Z6026CA for 94-03 7.3L Ford Powerstroke (Set of 2)

KWD 10
Brand
Sunluway
Weight
0.5 kg
– 1 +

Special Features

  • Application : Oil Rail Plugs for 1997-2003 7.3L Ford Powerstroke .New replacement for damaged and old oil rail plugs.
  • Set of 2 plugs with O-rings: Oil rail plugs located on either end of the cylinder head require a specialty o-ring if they begin to leak. Each Head Takes 1 Plug.
  • Nice Design :Oil rail plugs are large round 1 3/4″ plug with a 1/2″ drive socket hole in the middle of the head. You use the square end of a 1/2″ drive socket inserted into that hole to remove and replace them.
  • A Must Have : During engine rebuild it is good practice to replace these plugs and gaskets since they are almost impossible to reach once the engine is installed in the bay.

Description

Application : Oil Rail Plugs for 1997-2003 7.3L Ford Powerstroke

OEM Number : 4C3Z6026CA

Oil Rail End Plug Removal and Replacement
Step #1 – Remove the oil rail end plug by inserting the square end of a 1/2″ drive socket wrench into it.
Step #2 – Clean the threads on both the end plug and inside the oil rail hole. Make sure to remove the old screw lock adhesive 277 completely.
Step #3 – Remove the old oil rail end plug o-ring and place the new one in the groove on the oil rail plug.
Or if you're replacing the end plug, make sure the o-ring is in the correct position on the new plug.
Step #4 – Apply new screw lock adhesive 277 to the end plug threads and install it into the oil rail.
Step #5 – 7.3 Oil Rail End Plug Torque Spec – 60 ft. lbs.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}