SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi
The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems.
SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
Description
Description
This little mini servo motor compatible for Arduino is high in efficiency and power
Servo motors are small in size, and because they have built-in circuitry to control their movement, they can be connected directly to an compatible for Arduino.
Micro Robot Servo Motor - SG90 runs on electricity from a battery and spins at high RPM (rotations per minute) and very high torque
The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems.
Specification
1. Weight: 9g
2. Size: 23x12.2x29mm
3. Load-free operation speed: 0.12 seconds/60 degrees (4.8V); 0.10 seconds/60 degrees (6.0V)
4. Torque: 1.6kg/cm (4.8V)
5. Use temperature: - 30 ~+60 degrees Celsius
6. Dead zone setting: 5 microseconds
7. Working voltage: 4.8V~6V
8. Accessories: Three kinds of functional rudder angle, fixed screw, line length 25CM