Input voltage: DC/5-6V
Output signal width: 800-2200us
Can synchronize output control servos and compare performance for steering gears
Can accurately steer the servo control output signal
2 microseconds (1 millisecond = 1000 microseconds) can test whether the servo is able to respond to subtle changes
Display with the PPM signal test function, input PPM and the input signal changes and the PPM signal is output to the servo synchronously

Power on and automatically enter manual mode (Manual) 20 microseconds 50H analog servo signal cycle, frequency 50HZ, rotating potential, output pulses with reduced or increased width.
Button selection
1.S-1 manual mode (Manual)
2.S-2-bit mode (neutral)
3.S-3 automatic mode (automatic)

Button pulse width :
1.50H analog servo signal period 20us frequency 50HZ
2. The signal period of a 125H digital servo is 8US and the frequency is 125HZ
3.250H digital servo signal period 4US frequency 250HZ

Warn:
Digital or analog signal button selection, the corresponding servo system is then plugged into the steering servo, to avoid damage to the steering servo
S-3 automatic mode (auto) button pulse width :
1.50H analog servo signal period 20us frequency 50HZ
2. The signal period of a 125H digital servo is 8US and the frequency is 125HZ
3.250H digital servo signal period 4US frequency 250HZundefined

Package include:
1 x RC servo tester