Fitment
For Jeep Grand Cherokee 2016-2021
For Jeep Compass 2017 (MP)
For Jeep Compass 2018-2021
For Jeep Patriot 2018
For Jeep Renegade 2015-2021
For Dodge Dart 2012-2017
For Dodge Durango 2016-2021
For Chrylser 200 2015-2017
For Chrysler Pacifica 2017-2021
For Chrysler Voyager 2020-2021
For Fiat 500X 2014-2021
Auto Relearn:
Set tyre pressure
Start the engine
On dashboard, set the system into the relearn mode
Drive until the relearn is completed
Manual Relearn:
Engage parking brake and inflate all tires
set vehicle into the relearn mode
Use tool to activate the Left Front sensor
Repeat for RF/RR/LR tires
After activate for sensor. Relearn complete, the dashboard will show the info
Relearn Procedure
OBDII connector is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Activate TPMS Tool on left front tire sidewall next to the valve stem
Repeat for RF/RR/LR tires (Spare)if required
Apply OBD connector to DLC
Turn ignition to ON, Press OK on TPMS Tool to transfer data to ECU
Disconnect OBD connector from DLC
Turn ignition to OFF then ON
Drive at 12 mph for up to 5 minutes
Tips:
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool
Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID, Pressure, Frequency