Search

Search

-4%

Car Battery Charger and Tester, 12V 6A Smart LiFePO4 Battery Trickle Charger, CCA Load Tester Automotive Alternator Tester Digital Battery Analyzer for Lead Acid,Lithium Iron Phosphate Battery

KWD 11
KWD 12.500
Brand
Haibro
Weight
468 g
– 1 +

Special Features

  • ✅【3-in-1 Smart Battery Charger, Maintainer and Tester】Works as 12V battery charger, this 6Amp fully-automatic smart charger is powerful to solve various battery problems. It's the all-in-one solution car battery charger, trickle charger, battery desulfator, and 12V battery analyzer, charge and maintain your loss battery for stronger engine starts and extend battery life. No need buy battery charger and tester separately.
  • ✅【Test and Charge Your Battery】 Car running for years but not sure car battery status? Haibro automotive battery charger & tester can help you to test and charge 12 Volt or 24Volt batteries within a capacity of 3Ah to 200Ah, such as regular LiFePO4 flooded,VRLA, AGM, EFB, GEL and deep cycle batteries for Automobile, RV, SUV, ATV, motorcycle, boat, light truck, golf cart, trackor, forklift, pickup, mowers and more. (Lithium battery test is prohibited)
  • ✅【Fast and Accurate Analyzing】This compact 12V battery charger and tester voltmeter offers you an easy way to analyze the battery cell health status, battery charging status, cold cranking amps value(CCA Test), detect faults and bad cells(Test results are based on CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN and BCI Standards).This battery test result is helpful to prevent possible battery failures in advance, offer best battery health status for the car alternator and car starter.
  • ✅【Pulse Repair/Trickle Charge- Save Your Battery Life】Our smart battery charger owns high-frequency and low-frequency PULSE REPAIR technology, if the battery has been old/idle for along time and cannot be charged, select " REPAIR " mode to try to activate the battery. Trickle charging is the perfect final protection for your battery to be fully charged. Automatic detection, activate battery, one key to repair. Note: It can not activate a dead battery or repair a seriously damaged battery.
  • ✅【Large LCD Display Battery Test and charging data】The digital analyzer smart battery tester kit can monitor and display the data (internal resistance, voltage, discharge) and car battery status (excellent, good, poor, replacement) of the detected battery and its battery life % (SOH) and battery capacity %(SOC). Also show charging voltage and current, power percentage, battery full summer mode, winter mode, etc. Very simple steps to test or charge your various batteries.
  • ✅【A Must Have Car Emergency Accessory】This portable auto batteries charger and tester is a good battery maintainer tool for personal mechanic shop or private owner or good for gifts to your friends. It is equipped with polarity reverse connection protection,over-voltage protection and automatic temperature compensation, very satefy to use, it is a good battery emergency tools at your garage, you deserve it !

Description

Welcome to visit our store !
Thank you for purchasing Battery Charger+ Tester. Please patiently read and understand this use manual before operating this product.

About our battery charger & tester
Applying the most advanced conductance testing technology, and the reverse polarity protection etc.,
FTC-1206 server as a 12V battery charger and tester to provide technicians with critical information about battery health status,
to find battery and charging problems quickly, easily and accurately.

Compatibility
Please be noted that battery type and CCA values(Cold Cranking Amp) marked on the battery label, please refer to it before using.
Usage scope: All car engine starter battery, including LIFEPO4, Lead acid, Calcium, EFB, AGM battery, GEL battery,WET, etc.
Suitable for: Automobile facory, garage, auto battery manufacturer, auto battery agent, educational institution, DIY enthusiasts, etc.

Easy to use,just plug and play
1.Make sure the engine and all other accessory loads must be OFF during test in order to have accurate results.
2.Connect the tester's clamps with battery,select the test program according to the battery type/sdard/CCA, the battery tester starts to work.
And quickly displays the battery CCA value, health (%), state of charge (%), voltage (V), internal resistance (Ω).
3.Test completed,remove the clamps.

Specifications
Charge or Test range: 4AH - 200Ah
Voltage measure range: 8-30VDC
Test result: SOH, SOC, CCA Value, IR, etc.
Test standards: SAE,DIN, IEC, EN, CA, JIS
Working Temperature: -20'C to +60'C (-4'F to 140'F)
Dimensions(L*W*H): 177*86*57mm
Weight: 465g
Output cable 60cm, Input cable length 95cm

Package Contents
1. Battery Tester FTC-1206
2. User Manual
3. Storage bag

Compliant standards: CE, UKCA, FCC

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}