Fitment
Fit for CVO Road King FLHRSE6 2014
Fit forCVO Street Glide FLHXSE 2015-2024
Fit for CVO Road Glide FLTRXSE 2018,2020-2024
Fit for Road Glide FLTRX 2015-2024
Fit for Road Glide Special FLTRXS 2015-2024
Fit for Road Glide ST FLTRXST 2022-2024
Fit for Road King FLHR 2014-2024
Fit for Road King Special FLHRXS 2017-2024
Fit for Electra Glide Standard FLHT 2019-2024
Fit for Street Glide FLHX 2014-2024
Fit for Street Glide Special FLHXS 2014-2024
Fit for Street Glide ST FLHXST 2022-2024
Fit for FLHR, FLHRC, FLHRSE, FLHT, FLHX, FLHXS, FLHXSE, FLTRX and FLTRXS models 2014-2024
Requires separate purchase of Docking Hardware Kit. Street Glide and Road Glide models require Hidden AM/FM/WB Antenna P/N 76000513 or Antenna Relocation Kit P/N 76000582. Does not work with Boom! Audio Stage II Tour-Pak Speaker Kit P/N 76000526A. How to install your tour-pak rack?
1. Make sure your motor is installed a docking hardware kit first
2. place the notches into the forward docking points
3. Position the rotary latches over the rear docking points
4. Push the rear of the side plates downward and close the rotary latches by pressing the latch lever as far forward as it goes. You hear a click when the latch is in place
5. To remove the luggage rack, press the release button on each side. Push the rotary latch levers back. Carefully lift the rear of the side plates up. Pull the side plate notches out of the forward docking points.