Pet Microchip Scanner ISO11784/85/FDX-B/EMID Animal Handheld Reader,134.2kHz Pet ID Scanner Rechargeable Animal Chip Registration, for Dog/Pet/Cat/Pig/Animal. (White)

【Pet Microchip Scanner Helps Find Animals】- Pets are your little friends, just like your family, accompanying you every day, so you don't want to lose your pets. Pet scanner can help you accurately scan your pet microchip code. Reunite you with your pet.
【Support multiple protocols】- Pet microchip scanner support ISO11784 / ISO11785 / FDX-B/EMID. please check if it supports your microchip before purchasing. This chip reader can only recognize 15-bit internationa standard protocols and cannot recognize 9-bit IDs
【RFID Reader Operation Manual】- Press the pet microchip to start the device, you just need to bring the pet chip scanner close to the microchip,the pet reader is equipped with a speaker, when you scan successfully, the pet reader will “beep” to indicate successful scanning, and in the OLED display shows the electronic tag number, press the blue button to read the next tag.
【Wide Range of Applications】 -Universal chip scanner with stable performance, easy to carry, can be held in one hand, simple operation, suitable for the management of cats, dogs, hamsters and other small animals.
【USB Connection】 -The microchip reader can charge and upload data via USB cable. When the device is connected via USB, “USB” will be displayed in the upper left corner and the battery status will be displayed in the charging status. The device turns off automatically after 120 seconds without any operation.

Features:

1. Widely used for animal management, resource management, railway detection and so on.

2. OLED display screen, readable in the sunlight.

3. Alarm when the built-in battery is under low power.

4. Easy operation, rechargeable by USB interface.

5. Support reading FDX-B (ISO11784 / 11785) and EMID microchips.

Specification:

Frequency: 134.2kHz, 125kHz

Reading Standard: FDX-B ( ISO11784 / 85), EMID

Reading Distance: >15cm for 30mm ear tags, >5cm for 2*12mm glass tag

Reading Time:

Screen: 0.91in

Communication Method: USB2.0

Working Temperature: -10℃-50℃

Storage Temperature: 30℃-70℃

Power Supply: 3.7V Li-ion battery

Color: White

Packing list:

1 x ID Reader

1 x USB Cable

1 x User Manual

Note:

Please allow slight error due to manual measurement. Thanks for your understanding.

Hello,