VGETTING 50 Inch RGB LED Car Spoiler Light Strip -Multicolor
Warning tail lights: increase the warning function to protect the safety of car driving, can reduce the occurrence of accidents.
Durable and waterproof: ip67 waterproof level to ensure normal operation in rainy and snowy weather. Flexible and durable, shockproof and dustproof.
5 Flashing Modes:
Braking Light: Red light flashing；
Emergency Flashers: Yellow lights will flowing light up from the center to two side and cycle；
Driving Light: Multi-color LED lights are always on, different animation combinations；
Left Turn Signal: Yellow light flows to the left.
Right Turn Signal: Yellow light flows to the right.
Specification:
Material: flexible & durable rubber
Voltage: DC 12V
Led type：5050
Led qty: 171Pcs SMD
Waterproof rating: IP67
Product Size: Length: 50 Inch(128 cm), Width:1.38 Inch(3.5cm)
Wire length: 55.5 Inch+14 Inch(141cm+36cm)
Wires Connection:
Red wire connect with Positive；
Black wire connect with Negative；
Green wire connect with ACC；
White wire connect with Break；
Yellow wire connect with Turn Singal Indicator.
Installation Method
1. Remove the snaps of the right tail light in the trunk, and take the tail light wiring harness off.
2. Refer to the wiring diagram to connect the correct car wires. Test if the spoiler light is working properly.
3. Clean the sticking surface of the trunk cover, stick the light strip on the trunk, and press firmly for 10 seconds to fix it. (No contact with water recently)
4. Hide the wires and install the snaps, secure the wires with cable ties or tape. Finish.
Note: You can contact us if you have any questions. If the adhesive tape is contaminated, you can use some 3M tape.