Package Included:
1 * CO2 Cylinder Refill Adapter Hose（Optional length, With pressure gauge）
1 * Bag of fittings
1 * user's manual
Specifications and parameters:
Material: Stainless steel and 100% solid brass
Status: 100% brand new, With pressure gauge
Hose Length: 24 inch, 36 inch (Optional)
Working pressure: 3000 PSI
Thread For Large CO2 Tank: CGA320 G1/2-14
Fits soda stream tank thread: TR21-4
Instructions for use：
Before the inflation process, please put your small soda cylinders in the freezer to cool, Ensure that the small cylinder can flush more carbon dioxide.
1. Confirm the On/Off valve (A)and the release valve(C) are closed, rotating the pin switch(B) of small cylinder to the top(anticlockwise).
2. Connect the fill station connector(A) to the big CO2 bottle. ( use the wrench to tighten it, if your big Co2 tank don't have siphon inside, you need to place the big Co2 tank upside down )
3. Connect the small cylinder to the soda Co2 adapter(B).
4. Rotate the pin switch(B) of the adapter to the bottom(clockwise).
5. Open the big Co2 air tank's valve.
6. Open the On/Off valve(A) slowly, and close it after 2-3 seconds, and then open the release valve(C) to exaust the excess air inside the small cylinder, and then remember to close the release valve(C) after this step.
7. Open the On/Off valve(A) slowly again to do the inflation process, and last for 25-30 seconds, then close the On/Off valve(A) and the big Co2 tank's valve.
8. After fulling of gas, contrarotate the pin switch(B) to the highest position and open the release valve(C) to exaust the excess fas in the hose.
9. After inflating, unscrew the small cylinder.
Precautions：
If the inflation cannot be completed, Please check