This Original Super Glue Permanent Double Sided Mounting Tape is the perfect solution for all your crafting and mounting needs. With its strong adhesive, it can hold up to 20 pounds and forms a permanent bond. Ideal for use on a variety of surfaces, this multi-purpose tape is perfect for your crafting and DIY projects. The white finish blends in seamlessly, making it perfect for discrete mounting. This tape is suitable for use with Super Glue brand products and is sure to provide a secure hold. INSTRUCTIONS FOR USE: 1. Clean the surfaces to be joined with rubbing alcohol and let it dry. 2. APPLY the tape without touching the adhesive part with your fingers on the surface and cut. 3. PRESS the tape firmly and REMOVE the protective film. 4. BOND in the desired position and PRESS firmly for 30 seconds. The position of the object cannot be corrected after mounting. NOTE: Once in place, the Permanent Mounting Tape cannot be removed without damage to the adhesive. For better maintenance of the tape, keep it in its original blister. FOR BEST RESULTS: - Avoid the use of polishing cleaners on the surfaces to be bonded. - For large objects hanging vertically, it is essential to apply several tape strips along the surface. - On slightly rough supports, distribute the tape over the entire surface and ensure maximum contact of the latter on the support. - Not recommended for vertical joints of more than 20 Ibs. !!CAUTION!! Not suitable for polyethylene (PP), polypropylene (PP), PTFE, very rough, fragile, disintegrable or dusty surfaces, and non-stick surfaces. It is user's responsibility to determine suitability of product for proposed use. Holds up to 20 lbs per roll. This is a permanent tape and may cause damage if removed. Ensure that the surface is strong enough to hold mounted objects.