【LOW POWER CONSUMPTION AND GREAT STABILITY】: Here are the specs for the car kill switch: Rated current is 240 amps. Rated voltage is 12 volts. Standby power consumption is 3 milliamps. Power failure threshold ranges from 11.6V to 12V. Instantaneous current is 500 amps. The operating temperature of the battery kill switch is from -22°F to 194°F.
【SMART VOLTAGE SAFETY KILL SWITCH】: When the voltage of this car kill switch is below 11.8V, it will automatically cut off power after 120 seconds to save power. When the voltage is higher than 13.2V while driving, the remote control becomes invalid and can only be controlled by a manual switch to prevent accidental power cuts. This car kill switch uses a new type of relay that controls circuit disconnection and cutoff using magnetic principles. With a standby current of 3mA, it's more energy-efficient.
【PROTECT AND EXTEND BATTERY LIFE】: This car kill switch can prevent car battery depletion caused by long-term parking, line aging, forgetting to turn off lights, and other reasons. This remote battery protector can maximize the retention of car battery power and effectively protect and extend the life of the car battery.
【WHAT YOU GET】: You'll get 1 cut off switch, 2 remote controllers, 1 manual, 1 nut, 1 gold spacer, 2 silver spacers, and 1 cushioning sheet. This car kill switch uses the negative link method, is easy to install, and has more stable performance. Just follow the included instructions for installation. NOTE: Make sure to turn off the power before installation and do an ignition test after installation.
【APPLICATION AND PRECAUTIONS】: This kill switch is suitable for most 12V cars, boats, RVs, trailers, trucks, ATVs, UTVs, motorcycles, and vehicles with displacements less than 4.0. Negative pole sizes are 9-13 mm and 15-17mm. It's not suitable for small pile head vehicles. Note: The switch is 3.3" x 2.4" x 1.4". Before ordering, it's best to check and measure your car's battery compartment to see if there's enough space to install it and close the hood properly.
【MAGNETIC LATCHING FUNCTION】: The remote battery disconnect switch is an upgraded version of the previous generation product. This car kill switch uses a new type of relay that controls circuit disconnection by magnetic principle and has a standby current of 3mA, making it more energy-saving.
