1/2" Heim Joint Rod End Kit,.5" Chromoly Heim Joints Panhard Rod End Kit for Steering,Suspension, Traction Bars, Right&Left Hand Thread with Tube Adapters& Jam Nuts - 1Set
3/8" Rod end heim joint kit:3/8" left & right hand thread heim joint set with jam nut and tube adapters
Premium quality:The 3/8" heim joint rod end kit are heat treated and hard chrome plated finish to provide a longer use and heavy duty performance(load capacity-9,544 lbs)
Easy to install: Our heim joints for 3/8” rod end can be MiG and TIG welded with additional hardware for mating installation
Widely use:The 3/8 inch rod end heim joint kit great for steering and suspension,traction bars, sand rails,a-arms,race car ,rock crawlers,steering joints and links joints on hot rods
The rod end is with 3/8” shaft with 24tpi. 3/8” bore hold is the strongest way to make this heim.Fits Tube Size: 3/4" OD.x .058" Wall x .375" ID.
The Hillman Group 58080 Sleeve Bearing, Bronze 1/2 X 5/8 X 1-1/8-Inch, 5-Pack
KWD 5.500
-17%
uxcell TC815 Thrust Needle Roller Bearings with Washers 1/2" Bore 15/16" OD 5/64" Width 2pcs
KWD 2.500
S SYDIEN 4Pcs 8mm/0.31" ID Silver Zinc Alloy Pillow Block Flange Bearing Self-Alignment KFL08
KWD 4
XiKe 4 Pcs 6205-2RS Double Rubber Seal Bearings 25x52x15mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.
KWD 5
