This system consists of a water level sensor and a remote controller. The water level sensor is installed on the outdoor water storage container to detect the water level, and the remote controller can be placed anywhere in the house to control the opening and closing of the water pump;
Function: 1. Automatic water filling; 2. Timing water supply; 3. Dry running protection; 4. Water filling by manual setting; 5. Remote control; 6. Fault alarm; 7. Failsafe.
The automatic water level control system is used to regulate the water level of storage containers such as swimming pools, water tanks, and water towers.
It can help you: 1. Automatically start water filling to avoid discovering water shortage in the storage container when water is needed; 2. Automatically stop water filling to avoid wasting water resources due to forgetting to turn off the water pump; 3. To avoid damage to the water pump caused by prolonged working time of the water pump; 4. Remote controlling detection and display of water level in water storage containers;
Technical Parameters: Working voltage: AC 75V-400V; Working distance: 500m-1km (open area); Remote control frequency: 345/433Mhz; Control current: ≤40A; Working temperature: -20°C-70°C; Load power: ≤5kw; Product size: Controller 90x83x50mm.
Wengart Capacitive Proximity Sensor Switch LJC18A3-B-Z,M18,DC10-30V,300mA,10mm Detecting Distance,3 Wire (NPN_Normally Closed)
KWD 5
Nikou Ultrasonic Distance Sensor, Waterproof Garage Parking Occupancy Detector Robot Obstacle Avoidance IIC Output 3.3V‑12V
KWD 10.500
BIGTREETECH S2DW V1.0 Acceleration Sensor Module Compatible Klipper/BIGTREETECH Pi/Raspberry-Pi, High Resolution Tilt-Sensing Accelerometer
KWD 6
SparkFun 9DoF IMU Breakout-ICM-20948 Low power I2C & SPI enabled 9 axis motion tracking Includes Logic shifter Qwiic connection GPIO pins Digital Motion Processor Accelerometer Gyroscope Magnetometer
KWD 8
