Search

Search

2-PCS S3227 490R-RAC-01 Fuel Filter Element Marine Fuel Water Separator 10 Microns for Racor Mercury 35-8M0154764 8M0146206 886638 Sierra Suzuki 18-7948 99105-20005 Honda 17670-ZW1-801AH

KWD 11
Brand
KUNOANZ
Weight
499 g
Size2PCS-S3227 Filter Element
– 1 +

Special Features

  • Materials and Quantity:Corrosion-resistant housing and Upgraded material Original 3-layer filter paper made of synthetic fiber Adopt 10 micron large capacity filter element.1×S3227 Marine fuel filter element.1x O-ring.(two piece set)
  • Fit：Mainly used in outboard marine engines Replace part number Racor（S3227 490R-RAC-01);Mercury Mariner（35-8M0154764 35-8M0146206 35-886638 35-8M0103096 809097 8M0146203);Honda(17670-ZW1-801AH);Suzuki(99105-20005);Mallory(9-37882);Sierra(18-7948) pay attention 490R-RAC-01 Base assembly different OEM available.
  • Advantage：It can filter impurities in the fuel, protect the fuel pump nozzle, cylinder liner and piston ring, and reduce component wear. It greatly extends the service life of the engine. The filtration efficiency exceeds 99.6%, and it can intercept any pollutants larger than 10 microns.
  • Installation：Direct replacement, always pre-fill the dirty side of the filter with clean fuel without opening the fuel tank cap.（No instructions）See the description for details.
  • Service：Please make sure the model number, part number and picture are consistent with your product before ordering Please contact me if you have any installation problems or product issues.

Description

Package Includes:(two piece set)
1×S3227 Marine fuel filter element
1x O-ring
FIT:
Racor:S3227 490R-RAC-01
Mercury Mariner :35-8M0154764 35-8M0146206 35-886638 35-8M0103096 809097 8M0146203
Suzuki: 99105-20005
Honda: 17670-ZW1-801AH
Sierra:18-7948
Mallory:9-37882
pay attention:490R-RAC-01 Base assembly different, OEM available
Detailed installation steps：
1.Place the oil bucket under the fuel filter
2.Use a wrench to drain the fuel.
3.Remove the cover from your old device
4.Drain the residual water and oil from the old filter.
5.Remove old filter.
6.Clean the fuel filter housing cap.
7.Change the provided O-rings,and change the filter.
8.Screw the combination of the new filter and cap onto the housing with the wrench.
9.Reset the fuel filter indicator,press and hold the “select” button until you get a beep,complete installation.
Kind tips:This product does not come with an instruction manual.Please contact me if you have any installation problems or product issues.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}