JNB Pro EVA Hot Melt Adhesive for Edge Banding Machine, Edge Band Woodworking Glue Pellets for PVC, ABS, Acrylic, Wood Veneer, Melamin Edgeband etc. (5kg/11lbs, Natural)
Natural color = Premium option. Low filled, with good machinability. Excellent adhesion and high yield.
NOTE: High Bonding Strength. Designed for temperatures up to 210°C. Delivers strong, fast bonds.
TEMPERATURE DETAILS. The adhesive softens at 90-100°C and works best between 180-210°C. Keep the hot melt glue below 210°C to maintain its performance.
HOW IT PERFORMS. This adhesive glue bonds quickly. Curing is 20-30 seconds. With thickness of 50,000-60,000 cps viscosity at 200°C, it ensures smooth application and strong bond strength at ≥12 Mpa.
HOW TO USE IT. Keep your automatic/manual edgebanding machine running at >12 meters/min, applying 180-250 grams/m² of adhesive. Make sure the materials you're working with have the moisture content of 8-12%, applying 3-5 kg/cm² pressure for a solid bond.
MULTI-MATERIAL ADHESION. Suitable on PVC, ABS, acrylic, wood veneer, and decorative (melamine) paper and other edge banding materials on wood-based composites (WBC). Popular use as PVC edge banding, ABS glue, plywood edge banding. Others on wood veneer sheet, wood veneer strips, hardwood veneer sheets, maple veneer,
BEST PRACTICES FOR USE. Ensure all building materials are clean, dry, and have 8-10% moisture content. Keep the working area above 18°C. If colder than 15°C, warm the surfaces first. Close the hot glue melting pot lid to keep it clean. Lower the temperature if machine will be idle for more than 2 hours. For storage, store the hot glue bulk in a dry, cool place where the temperature is below 40°C. This will keep it effective for up to 2 years.
GENERAL INFORMATION. Most edgebanding is applied using hot melt glue, with EVA (Ethylene Vinyl Acetate) adhesive as a versatile choice that works well with various materials. Including veneer edgebanding and ABS edgebanding. EVA's re-meltable property makes it forgiving and easy to use. For the best results, use an edgebanding machine for consistent glue application; industrial-sized/smaller machines and manual are also viable. Tips for Application (1) Apply appropriate temperature (2) Adjust speed for good flow and correct open time for strong bond. (3) Apply even pressure to the entire edgebanding width to avoid gaps and bubbles. (4) Use of enough glue to cover all areas for secure bond.
Description
Recommended Operating Conditions and Precaution: 1. For best bonding result, materials to be used must be free of dust, oil, grease and be dry. 2. wood moisture content should be at 8 - 10%. The minimum temperature of substrates and ambient air should not below 18 °C. Avoid draught. 3. Close the lid after filling up the glue pot, If machine downtime of more than 2 hours, dial down the temperature of glue pot, prevent from glue aging. 4. If ambient temperature is below 15 °C, warm up the surface of subtrate and edgebands (with industrial electric dryer or infrared heating) 5. Clean the glue pot routinely with cleaning wax agent, to prevent from charring, therefore affecting heat transfer from glue pot. 6. Measure temperature of the glue pot and on application roller (i.e. with Infrared Thermometer). Calibrate temperature control system if needed. 7. In application, visually inspect the glue roller to ensure it has even and adequate glue coverage and is free of dust.
3M TALC Scotch-Weld Low Odor Acrylic Adhesive DP810NS, Tan, 48.5 mL Duo-Pak
KWD 18.500
CS Hyde 3M 4941 Very High Bond Conformable Acrylic Foam Tape, Double-Sided VHB Acrylic Adhesive, Liner, 45 mil Thick, Dark Grey, 0.75" Width, 5 Yard Roll
KWD 6
Glarks 3 Rolls Copper Tape with Conductive Adhesive, 3 Sizes Double-Sided Copper Foil Tape for Electrical Repair, Stained Glass, EMI Shielding, Grounding (1/2inch x 66ft, 1inch x 33ft, 2inch x 33ft)
KWD 7.500
20 of VHB 3M Adhesive Double-Sided Foam Tape High Bond Dots Conformable Acrylic Glue Replacement Kit 20 of 0.9 inch Circle Small Round
KWD 4.500
