Base Gear for Magic Bullet
Replacement Parts Base Gear Spare Part for Magic Bullet (Top Base)

Type: Gear.

Suitable For:Blender.

Color: as the picture shows.

This gear fits on the Power Base.

Compatible Brand: For Magic Bullet.

Used for both Cross and Flat Blade models.

All base gears for the Magic Bullet are reverse threaded.

Also a suitable fix for the Party Bullet, Baby Bullet and Merlin 123 models. (Compatible Model: Party Bullet, Baby Bullet and Merlin 123 models.)
Fits Magic Bullet Juicer Blender models: MB1001, MB-1001, MBR-2501, MBR2501, MB1001C, MB-1001C, 1001C, MB1001B, MB-1001B, 1001B, 1001, 7712, 101, 2501.
Not for the Nutribullet.

Please note: The brass or metal nut may still be attached to the blender shaft if the base gear became unthreaded. You will need to remove this piece prior to placing the new part on the shaft.

Equipment required for changing out the base gear (not included):
1. A set of pliers
2. Thick cloth
3. Slotted or Flat-head screw driver
4. Mineral oil for lubrication (not necessary but useful in some cases)
Directions to remove base gear:
1. Use pliers to hold the brass/metal nut in place firmly (Only if the base gear was unthreaded)
2. Insert the flat-head screw driver into the base of the blender and turn clockwise - The nut should twist off
3. Place the new gear on the shaft and turn counterclockwise - This will tighten the gear to the shaftv 4. The new gear should be securely fastened to the blender shaft!

Every Product from HASMX will enjoy 30 days Money-back and 18-Months worry-free warranty.

If you're not sure whether it fits your model, please email us-includes your Models and serial number.

Note - This is an aftermarket replacement Parts. Any brand name is used solely for the purpose of demonstrating compatibility.