VST Motion Sensor Light Switch, IR Handwave Activated Light Switch for Closet Light LED Lights and Under Cabinet Lighting with 12V JST Male and Female Connector (DC 12/24V 3A)
💁♀️【Tip】The switch can both work under DC 12V & 24V voltage. But its connetors are 12V JST male and female,which cannot be connected to VST's 24V driver.If you want to connect 24V's light, you have to cut the connector and connect them by hardwired.
🏳️🌈【Motion Sensor Switch】It is activated by handwave. handwave for on/off with slowly mode, if hold your hand above the sensor, you can adjust the brightness within 10% ~100% in one way direction( Bright or Dark)..
🏳️🌈【Smart Design】It has memory function, When power on the status is as same as power off last time. then handwave change brightnessto 100%. When the positive and negative poles are reversed, the product will not be damaged.
🏳️🌈【Installation】The sensor need ressessed mounted. The input and output connector is JST female and male connector. Make sure your power adapter and LED lights connected are JST plugs. JST male and female both are 25 cm length and switch cable is 2 meters cable.
🏳️🌈【Wide Application】This IR handwave sensor switch can be widely applicatedfor under cabinet, under shelf, counter, wardrobe, etc. Any places you want.
🏳️🌈【Working Distance】The handwave working distance is 90mm in front of sensor, the dimming distance is 20mm ~90mm, the 0 ~ 10mm distance is blind zone with only handwave on/off funtion.
🏳️🌈【Warranty】Provide 2-year warranty after-sales service, if you got any questions, please contact us first, we will try our best to help you.
-17%
Leviton SO262 2-Gang Decora/GFCI Device Decora Wallplate, Oversized, 302 Stainless Steel, Device Mount, Stainless Steel
KWD 5
Leviton 5461 20 Amp, 250 Volt, Industrial Heavy Duty Grade, Single Receptacle, Straight Blade, Self Grounding, Brown
KWD 4
Leviton MSTWL-A 20-Amp, 125-Volt, Right Angle Wiring Module For Lev-Lok Receptacles, Almond
KWD 2
POWERTEC 120V Magnetic Paddle Switch, 1/2 HP. Large Knee Paddle for Power Tools Fast Power off. Fits Table Saw, Router Table, Drill Press, Bench Saw, Band Saw & Other Electrical Equipment (71054)
KWD 5
