Diode Bridge Rectifier SSAYEC432 for Genset generator AC alternators LSA43.2 and LSA44.2

Bridge Rectifier SSAYEC432 includes:
Bridges *2
Positive diodes * 3
Negative diodes * 3
Varistor * 1

The kit is suitable for LSA43.2 and LSA44.2 generator AC alternators.

SSAYEC432 Bridge Rectifier can replace the following models:
ALT432KD001, GP432, LSA432, and SSAYEC432
922-230

Description
This SSAYEC432 diode kit is suitable for the alternator. A diode is in effect a switch which allows electrical current to flow in one direction only. They are primarily used in power supply operation. The rectifier diodes can handle higher current flow than regular diodes and are used in order to change alternating current produced by the alternator which cannot be used by the machine into direct current which can be used by the machine. They are designed as discrete components or as integrated circuits and are usually fabricated from silicon although other materials such as selenium and germanium are used.
Characteristics of the SSAYEC432 Bridge Rectifier
The first step to take when the rectifier is showing signs of incorrect functioning is to test the diodes and surge suppressor or varistor in the rectifier. First disconnect the diodes from the terminal end and using a multimeter check the diodes in both the forward and reverse direction. If any fault is found all the diodes should be replaced. If the varistor or surge suppressor is found to be faulty the diodes as well as the varistor should be replaced. All diodes rectify but the term is normally used for higher currents and voltages. Diodes only begin conducting electricity when a certain threshold is present.
...