📏Tire size: 10x3 inch
📏Tire OD (without inflation): 240mm (9.44”)
📏Tire ID: 150mm (5.9”)
📏Tire Slot Width: 56mm (2.2”)
📏Cross-section height: 50mm (1.96”)
📏Tire sidewall width: 80mm (3.14”)
📏Tire weight: 0.8kg (1.76lb)
📏Maximum Inflation Pressure (PSI): 50 P.SI COLD (345KPa).
📏Maximum Load 85KG (187lbs)
4PR TUBELESS
🥳Compatible models: our 10x3.0 inch 80/65-6, 255x80 off-road vacuum tires fit
✔fit for Joyor S5/ S10-S/ Y7-S
✔fit for Kugookirin G3PRO/ M4Pro
✔fit for Yume Y10/ D4+
✔fit for Ninebot P100S/ P65
✔fit for Gotrax Atlas
✔fit for MetaMoov ZO08
✔fit for Nanrobot D4+2.0/ D4+2.5/ D4+3.0/ D6+1.0/ D6+2.0 / D6+3.0/ N6
✔fit for Inokim OXO
✔fit for VSETT 10+/ 10 single motor
✔fit for Varla Eagle One
✔fit for Kaabo Wolf Warrior
✔fit for Apollo Ghost/Apollo Phantom V2/ Apollo pro
✔fit for Speedual Grace 10 Zero
✔fit for Dualtron Eagle pro
✔fit for Zero 10X
✔fit for Xtron X10 Pro
✔fit for Kaabo Wolf Warrior 11/ X Pro/ Mantis 10
✔fit for Freego EVES10
✔fit for Uncool VDM 10
✔fit for Wolf Warrior X GT
✔fit for FreegoEV ES10
✔fit for Apollo 2022 explore
✔Other scooters with 10x3.0, 80/65-6, 255x80 original tires
🔧Installation Tip: Place the tires in boiling water and let them sit for 15-20 minutes, the softened tires are easier to install. If you don't know how to install the valve stem, please send us a message. We are happy to help you.
😊How to choose the right tires: good materials can prolong tire life and reduce the number of tire changes. It can save you money in the long run. Before purchasing, please check the side of your original tire to see if it is marked 10x3.0 or 80/65-6 or 255x80, if so, then our tire is compatible with your scooter. If you're not sure if this is right for you, send us a message.