REQUIRED READING FOR PURCHASE:
1-We recommend replacing the extractor blade every 5-6 months to obtain the best performance
2-The sealing gasket may loosen during transportation. Please stick it close to the blade for best performance before use
3-Check the bottom gear. If the gear is loose, tighten it counterclockwise
4-Don't run the mixer for more than 4 minutes at a time. Because high-speed rotation will generate a lot of heat, which will not only accelerate the wear of parts but also cause the mixture to scorch due to long-term heating
5-Don't add components beyond the "maximum" line to avoid overflow
6-Please ensure that the blade is in the correct position and locked. If the mixer starts to leak, please replace it with a new washer
7-Please check your mixer regularly. If there is leakage or noise, you need to replace the blade
8-We don't claim these are original Nutri ninja. It is only used to prove the compatibility of accessories
9-Again, nonstandard use will accelerate the smoothness and deterioration of accessories
10-We strive to provide customers with a good purchase experience as much as possible. We'd like to address any issues or concerns you have.

COMPATIBILITY:
The 6 Fins Female Pro Extractor Blade replacement Assembly for Ninjia blender is compatible with Nutri Ninja Auto IQ Series

BL450-70(900W),BL451-70,BL454-70,BL455-70(1000W),BL480-70,BL480W-70,BL481-70,BL482-70,BL483-70,BL484-70

Pls check if the bottom blade of your Ninja blender has 6 fins. Only 6 fins blender blade can be fit for this blade

Only fit for 18oz, 24oz, 32 oz cup. NOT fit for 16oz cup

NOT COMPATIBLE WITH:
NOT compatible with 7 fins Nutri Ninja BL450-30,BL451-30,BL454-30,BL455-30 1000W,BL480-30,BL480W-30,BL481-30,BL482-30,BL483-30,BL484-30
Not compatible with 3.35in-6 fins Ninja BL770,BL771,BL772,BL780,BL660,BL740