- Shopping, made easy.
- /
- Get the app!
Specification:
Model: HK121610
Drawn Cup Material: ST14 Steel
Cage Material: ST13 Steel
Needle Roller Material: Chromium Steel (GCr15)
Bore Diameter (Fw): 12mm
Outside Diameter (D): 16mm
Width: 10mm
Static Load Capacity (Cor): 5800N
Dynamic Load Capacity (Cr): 4150N
Maximum Rotational Speed (Oil): 19000rpm
Number of Packs: 10 Pcs
Description:
Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
For various applications such as planetary gears in automobiles, constant mesh gearboxes, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
NOTE:
Install with a press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.
Thrust Ball Bearings, 10pcs F5-10M Miniature Plane Axial Ball Bearing 3-in-1, 5mm x 10mm x 4mm Chrome Steel Single Direction
KWD 4.500
Pillow Block Bearing, 2Pcs KP007 Flange Mounted Pillow Bearings - Bore 35mm/1.38" ID Self Alignment Zinc Alloy Plummer Block Bearing for Diameter 35mm Linear Shaft Rod
KWD 9.500
6808-2RS Deep Groove Bearings, ID 40mm x OD 52mm x Width 7mm Double Rubber Sealed Ball Bearings, Pre-Lubricated (GCr15) Chrome Steel 2pcs
KWD 3.500
MR84-2RS Deep Groove Ball Bearings, ID 4mm x OD 8mm x Width 3mm Miniature Bearings, Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Blue Z2 Lever 10pcs
KWD 4.500
