Descriptions:
Thanks to new and old customers for purchasing our dry grinding machine. We know that many customers want to buy additional grinding discs for standby. We have launched a new pair of grinding discs, but it is only applicable to the models on sale in our shop, otherwise it may not be applicable.

Specifications:
Diameter: 15cm
Net weight: 0.6kg
Quantity: 1 set(2 grinding discs)
Material: fine cast steel
Purpose: dry grinding
Applicable to our model（150 model）:B08SHHT3HF
(Model 150 grinder sheets also can be used for other Commercial Electric Feed Mill Dry Grinder, please measure dimension before ordering;)

How to Adjust:
1. Put the moving grinding disc back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.
2. Start the motor and tighten the adjusting screw clockwise until the grinding piece rubs a sharp sound. Turn off the switch after the motor idles for two minutes.
3. Open the front cover, take out the grinding disc, observe the friction marks of the moving grinding piece and the static grinding piece tooth groove, and touch the grinding piece around the hand. If the friction marks on the grinding piece are evenly distributed, and the heat difference of the grinding piece is not obvious. This means that the grinding plate is installed in balance and can be used directly without adjustment.

Note:
Do not use too much force, the three screws should be evenly applied and gradually locked.

Packing list:
1 set Grinding plate of pulverizer