Product Name: Brass Animal Heads Wall Decor
Material: Environmentally friendly resin
Color: Brass, Copper
Widely applicable with individuality：
Home walls or doors for living room, bedroom, kitchen, bathroom, garden decoration;
Desktop decoration;
bar, restaurant, special indoor and outdoor business, etc.
Product Size and Net Weight:
Deer head: 5.3x2.4x14.8in 10.3oz
Bear head: 5.3x2.8x6.3in 9.7oz
Rabbit head: 5.9x2.0x9.5in 5.0oz
Fox head: 4.1x2.8x5.9in 7.2oz
Rat head: 3.5x2.0x3.9in 3.9oz
5pcs: 9.5x9.5x7.1in 3.1lb
Nail-Free Hook: 2.2x2.2in 0.2oz
Packing List:
1x Decorative Resin Animal Head Wall Mount
1x Small Bottle of Glue for attaching the ears only (deer and rabbit)
1x Nail-Free Hook (Strongly adhered to smooth surfaces, not suitable for uneven walls, dusty walls, wallpaper)
Tips:
Please note that there will be slight errors in manual measurement and the actual product may not be exactly the same color as the picture due to shooting light.
The products are packed in shockproof packaging and carefully inspected before being sent directly to customers by the seller to ensure the quality of the products is intact.

How to use nail-free hooks to install resin sculptures:
1. Choose a smooth pasting surface and wipe off the dust on the surface
【Non-smooth surfaces, such as uneven walls, dusty walls, wallpaper, etc. are not suitable for nail-free hooks】
2. Tear off the cover film behind the hook to expose the glue surface;
3. Align the glue surface with the pasting surface and press it, and exhaust the air between the glue surface and the pasting surface;
4. It is best to wait 24 hours after pasting to ensure that it is completely pasted and firmly;
5. Be sure to tighten the screw head on the hook;
6. Align the hook screw head to the hole on the back of the sculpture and insert it. The screw head will be stuck in the hole and will not fall off.
Please install according to the above instructions. Improper use of nail-free hooks will affect the pasting and load-bearing effects. If you are not sure about the pasting effect of the pasting surface, you can use iron nails or other methods to fix the installation.