Specification:
Condition: Brand New
Item Type: Gaps Strip
Material: PE + Rubber
Color: White
Using Temperature: -40-100
Width: Approx. 2.2cm / 0.9in
Length: Approx. 3.35m / 11ft
Weight: Approx. 149g / 5.3oz

Package List:
1 x Gaps Strip1 x User Manual

Note:
1. the parts to be sealed firstly and keep them dry;2. Before use, firstly measure the length dimension of the required sealing part accurately;3. Take out the product, measure the same length of the waterproof strip and the sealed part again and cut it;4. Firstly peel off the 5cm length of the adhesive tape on the back of the product and fold it to 90°, and then fix the waterproof strip on the surface to be pasted; continue to peel the adhesive tape until all installations are completed;5. When the product is pasted at a 90° turn, cut each side of into a 45° mating interface.6. The temperature range of the installation room is preferably around 25, if the temperature is too low, the adhesive can be pasted after heating the adhesive with a hair dryer;7. After the product is pasted, it will be pressed hard to make it stick more firmly;8. After the product is pasted, do not mix with water within 24 hours and keep it dry.