LT1083CP feature description : It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the smaller the output current. If the voltage difference is too large, the LT1083CP and some components will heat up very badly or even burn out the components, and the current output will be very small.

For example, if the output voltage is required to be 24V, the ideal DC voltage before stabilization is 26V, which is converted into an AC formula (26Vdc/1.4 times = 18Vac), so an 18V output transformer is ideal.

The product's board is made of high-quality 1.6mm double-sided fiberglass board, double-sided wiring, tin-plating process, the main filter capacitor pin is installed with a "lead pin/hard pin" coexistence design, and the capacitor diameter is a filter capacitor of 23mm.

The layout adopts the classic one-point grounding, the ground wire is all copper, and the components are symmetrically arranged, which is beautiful and generous.

Note: This AC input needs to add a transformer, and cannot be directly connected to AC220V! ! ! !

Input AC voltage requirement: Max 35V AC

Output DC current: maximum 7A (can be realized only under small pressure difference)

Size: 92*50MM