【Package Content】: 30 X T3 wire connectors (450V/4KV, 32A) . Suitable for hard wire 0.08-4.0mm² / 28-12AWG, soft wire 0.08-2.5mm²/28-14AWG. Cross Section: 12-28AWG.
【Material】: Tinned with pure copper, built-in stainless steel buckle.
【Easy to Use】: 1. Put the handle board to 90°; 2. Strip the wire about 0.39inch(10mm) ; 3. Put down the handle.
【Be Reused】: If you need to replace other wires, just turn the small pull rod up, pull out the wires you need and replace them. there is a test hole that can be used to test whether it is energized or not.
Justrite 08497 10' Long Insulated Grounding Wire with Hand Clamp and 1-4'' Terminal
KWD 25
Dinkle Assembly Kit DK2.5N-GN 10 Gang Green with Jumpers DIN Rail Terminal Blocks, 12-22 AWG, 20 Amp, 600 Volt
KWD 8.500
Screw Terminal Block 5mm Pitch 2 Pole (10 pcs)
KWD 2.500
DBParts 10 Sets 7-Pin (7 Pole) 5.08mm Pitch Angle Screw Terminal Block Connector Panel PCB Mount DIY
KWD 4.500
